Canadian-owned · Shipping across Alberta & Canada
Canadian-owned · Shipping across Alberta & Canada
CoresupplyX supplies SFT-Mesh products as an authorized distributor of SFTec. The line covers two different jobs: SFT-Bar®Mesh, a glass fiber reinforced polymer mesh used as a lighter, non-corrosive alternative to steel mesh for structure strengthening, and SFT-ARMesh, an alkali-resistant fiber mesh for the external surface of concrete walls.
Steel mesh rusts when chlorides or moisture reach the wires, and the expanding corrosion cracks the cover. GFRP mesh does not corrode. AR mesh is used on the face of walls to improve crack control and surface durability; it reduces cracking, it does not eliminate every crack.
SFT-Bar®Mesh – For Structure Strengthening
SFT-Bar Mesh is a GFRP grid made with FRP technology. It is aimed at applications that would otherwise use welded wire or steel mesh, where corrosion, weight, or conductivity is a problem. Sheets are supplied about 1 m × 5 m, stacked on a pallet. Store under a black cover or tarp.
| Product | Bar Diameter | Opening | Min. Strength, Both Directions (MPa) | Min. Modulus (GPa) |
| D3-100×100 | 3 mm | 100 x 100 mm | 800 | 45-60 |
| D3-150×150 | 3 mm | 150 x 150 mm | 800 | 45-60 |
| D5-100×100 | 5 mm | 100 x 100 mm | 800 | 45-60 |
| D5-150×150 | 5 mm | 150 x 150 mm | 800 | 45-60 |
Strength and modulus figures are radial and longitudinal minimums. Use the current SFTec sheet for submittals.
Typical uses: slab and wall strengthening, areas that need a non-corrosive mesh, and jobs where a lighter grid reduces handling time versus steel mesh.
SFT-ARMesh — external surface of walls
SFT-ARMesh is a fiber mesh for strengthening the outside face of concrete walls. It is best suited to crack control on external surfaces and to improving long-term surface durability. It does not stop all cracking.
Rolls are 1,000 mm wide × 50 m. Store at 5–35°C and 35–75% humidity; manufacturer guidance is up to one year under those conditions.
| Product | Mesh Space | Weight (g/m²) | Strength to failure (N/5 cm) rad. / long. | Alkaline residual strength (N/5 cm) | Residual rate |
| 160(5×5)-1000L | 5 × 5 mm | 160 | 1600 / 1600 | 1200 / 1200 | ≥75% / ≥75% |
| 160(10×10)-1000L | 10 × 10 mm | 160 | 1600 / 1600 | 1200 / 1200 | ≥75% / ≥75% |
| 130(12×12)-1000L | 12 × 12 mm | 130 | 1300 / 1300 | 1000 / 1000 | ≥75% / ≥75% |
| 110(6×6)-1000L | 6 × 6 mm | 110 | 1000 / 1000 | 800 / 800 | ≥75% / ≥75% |
Pack counts: 160(5×5) about 40 rolls / 2,000 m² per pallet; 160(10×10) and 130(12×12) about 25 rolls / 1,250 m²; 110(6×6) about 47 rolls / 2,350 m².
Benefits
Ordering
Tell us SFT-Bar Mesh size (diameter and opening) or AR mesh grade, quantity in sheets or rolls, and delivery window. Same-business-day pricing on standard requests.
| Catalog: | FRP Straight Rebar, FRP Closed Ties, FRP “V or U” Shape, FRP Spirals (circle), FRP “Echelon” Shape, FRP Hollow Rebar |
|---|
SFT-RockBolt is SFTec’s glass fiber reinforced polymer rock bolt for pre-grouted holes and ground-support applications that need a corrosion-free, cuttable composite bolt. CoresupplyX supplies it as an authorized distributor.
Steel rock bolts corrode in wet, saline, or chemically aggressive ground and can obstruct later excavation or TBM passage. GFRP rock bolts don’t rust, remain lightweight for manual handling in confined headings, and can be cut by excavation equipment when a “soft” inclusion is required.
CoresupplyX supplies SFT-Mesh products as an authorized distributor of SFTec. The line covers two different jobs: SFT-Bar®Mesh, a glass fiber reinforced polymer mesh used as a lighter, non-corrosive alternative to steel mesh for structure strengthening, and SFT-ARMesh, an alkali-resistant fiber mesh for the external surface of concrete walls.
Steel mesh rusts when chlorides or moisture reach the wires, and the expanding corrosion cracks the cover. GFRP mesh does not corrode. AR mesh is used on the face of walls to improve crack control and surface durability; it reduces cracking, it does not eliminate every crack.
CoresupplyX supplies SFT-Connector as an authorized distributor of SFTec. SFT-Connector is a glass fiber reinforced polymer (GFRP) shear connector that ties two concrete wythes through an insulation layer, or ties ICF and other concrete elements, without introducing a corrosion path the way a steel tie can.
The connector is used on ICF walls, slabs, plant-cast precast panels, site-cast tilt-up panels, and other insulated concrete structures. Length is customized to the wall or panel build-up. Accelerated-aging tests reported by the manufacturer indicate the connector material resists alkali attack for over 100 years.
SFT-Bar® is SFTec’s glass fiber reinforced polymer (GFRP) rebar for concrete. CoresupplyX supplies it as an authorized distributor, with the same mechanical properties, grades, and ICC-ES evaluation (ESR-5081 / EER-5081) published by the manufacturer.
SFT-Bar is produced from continuous glass fibers in a polymer matrix and is intended for structures that need corrosion resistance, lower weight, or electromagnetic neutrality. It is approximately one-quarter the weight of steel, non-conductive, and free of the rust-expansion mechanism that shortens the service life of steel-reinforced concrete in aggressive environments.
Reviews
There are no reviews yet.